Sample Preparation
Sample Preparation Tools for Electron Microscopes
![-](/us/en/media/em-mc1000_main_jpg_tcm47-23954.jpg)
Ion Sputter MC1000
An ion sputter increases the conductivity of non-conductive sample to prevent charging during electron microscope observation. MC1000 employs magnetron sputtering technology to reduce damage to the sample, and the target can be selected from among Pt, Pt-Pd, Au and Au-Pd depending on the purpose.
![-](/us/en/media/em-zone2_main_png_tcm47-26108.png)
Sample Cleaner ZONESEMII
The ZONESEMII Tabletop Sample Cleaner uses UV-based cleaning technology to minimize or eliminate hydrocarbon contamination for electron microscopy imaging.
![-](/us/en/media/im4000ii_01_tcm47-183500.png)
Ion Milling System IM4000II
IM4000II supports both cross section milling and flat-milling to prepare specimens depending on the purpose. Cooling Temperature Control, Air Protection Holder Unit, and Various options enable preparation of various cross section specimens.
![-](/us/en/media/em-arblade5000_main_png_tcm47-24861.png)
Ion Milling System ArBlade 5000
ArBlade 5000 supports both cross-section milling and flat milling to prepare samples depending on the purpose. Cross section width can be expanded to 8mm for applications requiring wide area milling such as electric components.
![-](/us/en/media/em-zonetem2_main_png_tcm47-28501.png)
Sample Cleaner ZONETEM II
The innovative ZONETEM II Desktop Sample Cleaner uses UV-based cleaning technology to minimize or eliminate hydrocarbon contamination for electron microscopy imaging. ZONE offers easy-to-use cleaning for pre-analysis sample preparation, ensuring the best possible data from your TEM samples.
![Ion Milling System IM4000Plus](/us/en/media/em-im4000plus_main_png_tcm47-30860.png)
Ion Milling System IM4000Plus
The IM4000Plus Ion Milling System utilizes a broad, low-energy Ar+ ion beam milling method to produce wider, undistorted cross-section milling or flat milling, without applying mechanical stress to the sample.